Top » Catalog » Volkswagen » Golf/GTI » MK4 (99-05) » 12V VR6 » Engine » Forced Induction » KNVR6MKIVSTG3KIT
mjm topsellers
Coolant/Antifreeze, G12 (OEM)
Pentosin is the OE supplier for G12 coolant for Volkswagen and Audi.

Designed specifically for Volkswagen and...

Control Arm Bushings, 4-PC (TT/R32)
The most popular part number sold within our catalog, this is the kit your Volkswagen needs to rid itself of...
Timing Belt Kit "PLUS EXTRA" (OEM)
Do not procrastinate on doing the proper maintenance like a timing belt change at the recommended intervals on your 1.8T...
Strut Mounts with Bearings, Set of 2 (OEM)
SACHS is an OEM supplier to Volkswagen and Audi.

Includes the set of two (2) strut mounts...

Head Bolt Set (OEM)
Genuine OEM head bolt set for all 12V VR6 motors.

Includes all 20 OEM head bolts. ...

Ball Joints with Hardware, Set of 2
Ball joint set with hardware from quality German manufacturer Meyle.

Includes two (2) ball joints with locking...

Strut Mount and Bearings, Set of 2 (Heavy Duty)
Upgrade to heavy duty German strut mounts in your VR6 or earlier converted car with these mounts from quality manufacturer...
Coolant Temperature Switch with O-Ring, Green (OEM)
Elth is an OEM supplier to Volkswagen and Audi.

Includes OE updated (green) water temperature sensor with...

Crankshaft Seal, Rear Main (OEM)
OEM crankshaft seal; also referred to as rear main seal.

This product fits:


Ignition Switch
Ignition switch from quality German manufacturer Meyle.

This product fits:

  • 1990-1998 Golf
  • ...

Turbo Kit, Stage III
Turbo Kit, Stage III

If you want to do nothing short of embarrassing your buddy's MK4 1.8T, the Kinetic Stage III Turbo Kit will do just that (and them some). With a Stage III Turbo Kit, you'll be putting the hurting on more than just 1.8Ts. The Stage III Kit is sure to satisfy the need for speed. Adding a low compression cylinder head spacer as well as 42# injectors to the Stage II Kit, this kit is specifically designed for the 1999.5-2002 12V VR6 Golfs and Jettas. With a 3 inch exhaust system and 92 octane or higher fuel you will see 350+ wheel horsepower.

Each Kit Features:

  • Spark Plugs
  • TiAL 38mm Wastegate
  • 3" Stainless Steel Intake
  • AFE Re-useable Air Filter
  • Braided Oil Lines with Fittings
  • 2.5" Stainless Steel Downpipe
  • Magnetti Marelli 42# Injectors
  • Kinetic Motorsport VR6 Manifold
  • Hardware/Gaskets/Nuts/Bolts, etc.
  • C2 Motorsports Flashloaded 42# Software
  • Kinetic Motorsport Head Spacer Gasket Kit
  • Kinetic Motorsport Silicone Hoses and Stainless Steel Clamps
  • Kinetic Motorsport (Rotomaster) T3/T4 Turbocharger (60 Trim)
  • Kinetic Motorsport Aluminum Intercooler Core with Black Sandtex Powder Coated Intercooler Tubing

NOTE: Your ECU must be shipped to C2 Motorsports for programming. Please note if running more than 13psi of boost, an intake manifold other than the stock piece will need to be used.

This product fits:

  • 1999.5-2002 Golf/Jetta 12V VR6

Silicone Hose Color:

Terms and Conditions
Copyright © 2017 MJM Autohaus

VW is a registered trademark of Volkswagen-AG. MJM Autohaus, Inc. is in no way affiliated with or sponsored by Volkswagen. The words VW, Volkswagen, Audi, TDI, Golf, Passat, Rabbit, Cabriolet, Cabrio, Scirocco, Corrado, Jetta, or Beetle are trademarks of Volkswagen of America, Inc. Any use is for the sole purpose of application and descriptions. MJM Autohaus, Inc. does not wish to infer any connection either direct or implied between that of MJM Autohaus, Inc. and Volkswagen of America.

Site Secured By The Website Guardian